Загрузка
ООО «ААА ЕВРОТЕХСТРОЙ»
г. Москва, 2-й Кабельный проезд, дом 1, корп 2, третий этаж, офис 2305
ООО «ААА ЕВРОТЕХСТРОЙ»
г. Москва, 2-й Кабельный проезд, дом 1, корп 2, третий этаж, офис 2305
Загрузка
| Product range | Control relays easyE4 |
| Basic function | Starter kit |
| Supply voltage | 24 V DC |
| Software | EASYSOFT-SWLIC/easySoft 7 |
| General | |
| Standards | EN 61000-6-2EN 61000-6-3IEC 60068-2-6IEC 60068-2-27IEC 60068-2-30IEC 61131-2EN 61010EN 50178 |
| Mounting | Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories) |
| Terminal capacities | |
| Solid | 0.2/4 (AWG 22 - 12) mm2 |
| Flexible with ferrule | 0.2/2.5 (AWG 22 - 12) mm2 |
| Standard screwdriver | 0.8 x 3.5 mm |
| Climatic environmental conditions | |
| Operating ambient temperature | -25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C |
| Condensation | Take appropriate measures to prevent condensation |
| LCD display (clearly legible) | 0 - 55 °C |
| relative humidity | in accordance with IEC 60068-2-30, IEC 60068-2-785 - 95 % |
| Air pressure (operation) | 795 - 1080 hPa |
| Ambient conditions, mechanical | |
| Protection type (IEC/EN 60529, EN50178, VBG 4) | IP20 |
| Vibrations | In accordance with IEC 60068-2-6constant amplitude 0.15 mm: 10 - 57constant acceleration 2 g: 57 - 150 Hz |
| Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms | 18 Impacts |
| Drop to IEC/EN 60068-2-31 [Drop height] | 50 мм |
| Free fall, packaged (IEC/EN 60068-2-32) | 0.3 m |
| Mounting position | Vertical or horizontal |
| Electromagnetic compatibility (EMC) | |
| Overvoltage category/pollution degree | III/2 |
| Electrostatic discharge (ESD)applied standard | according to IEC EN 61000-4-2 |
| Electrostatic discharge (ESD)Air discharge | 8 kV |
| Electrostatic discharge (ESD)Contact discharge | 4 kV |
| Immunity to line-conducted interference to (IEC/EN 61000-4-6) | 10 V |
| Insulation resistance | |
| Clearance in air and creepage distances | nach EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201 |
| Insulation resistance | per EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201 |
| Back-up of real-time clock | |
| Accuracy of real-time clock to inputs | typ. ± 2 (± 0.2 h⁄Year) s/day |
| depending on ambient air temperature fluctuations of up to ± 5 s/day (± 0.5 h⁄year) are possible | |
| Power supply | |
| Rated operational voltage [Ue] | 24 DC (-15/+20%) V |
| Technical data for design verification | |
| Static heat dissipation, non-current-dependent [Pvs] | 2 W |
| Operating ambient temperature min. | -25 °C |
| Operating ambient temperature max. | +55 °C |
| IEC/EN 61439 design verification | |
| 10.2 Strength of materials and parts10.2.2 Corrosion resistance | Meets the product standard's requirements. |
| 10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. |
| 10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat | Meets the product standard's requirements. |
| 10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects | Meets the product standard's requirements. |
| 10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation | Meets the product standard's requirements. |
| 10.2 Strength of materials and parts10.2.5 Lifting | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts10.2.6 Mechanical impact | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts10.2.7 Inscriptions | Meets the product standard's requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard's requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard's requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Is the panel builder's responsibility. |
| 10.8 Connections for external conductors | Is the panel builder's responsibility. |
| 10.9 Insulation properties10.9.2 Power-frequency electric strength | Is the panel builder's responsibility. |
| 10.9 Insulation properties10.9.3 Impulse withstand voltage | Is the panel builder's responsibility. |
| 10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material | Is the panel builder's responsibility. |
| 10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.11 Short-circuit rating | Is the panel builder's responsibility. |
| 10.12 Electromagnetic compatibility | Is the panel builder's responsibility. |
| 10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| PLC's (EG000024) / Logic module (EC001417) | |
| Electric engineering, automation, process control engineering / Control / Programmable logic control (SPS) / Logic module (ecl@ss10.0.1-27-24-22-16 [AKE539014]) | |
| Supply voltage AC 50 Hz | 0 - 0 V |
| Supply voltage AC 60 Hz | 0 - 0 V |
| Supply voltage DC | 20.4 - 28.8 V |
| Voltage type of supply voltage | DC |
| Switching current | 0.5 A |
| Number of analogue inputs | |
| Number of analogue outputs | |
| Number of digital inputs | 8 |
| Number of digital outputs | 4 |
| With relay output | No |
| Number of HW-interfaces industrial Ethernet | 1 |
| Number of interfaces PROFINET | |
| Number of HW-interfaces RS-232 | |
| Number of HW-interfaces RS-422 | |
| Number of HW-interfaces RS-485 | |
| Number of HW-interfaces serial TTY | |
| Number of HW-interfaces USB | |
| Number of HW-interfaces parallel | |
| Number of HW-interfaces Wireless | |
| Number of HW-interfaces other | 1 |
| With optical interface | No |
| Supporting protocol for TCP/IP | Yes |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for CAN | No |
| Supporting protocol for INTERBUS | No |
| Supporting protocol for ASI | No |
| Supporting protocol for KNX | No |
| Supporting protocol for MODBUS | Yes |
| Supporting protocol for Data-Highway | No |
| Supporting protocol for DeviceNet | No |
| Supporting protocol for SUCONET | No |
| Supporting protocol for LON | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for EtherNet/IP | No |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Radio standard UMTS | No |
| IO link master | No |
| Redundancy | No |
| With display | Yes |
| Degree of protection (IP) | IP20 |
| Basic device | Yes |
| Expandable | Yes |
| Expansion device | No |
| With timer | Yes |
| Rail mounting possible | Yes |
| Wall mounting/direct mounting | Yes |
| Front build in possible | Yes |
| Rack-assembly possible | No |
| Suitable for safety functions | No |
| Category according to EN 954-1 | None |
| SIL according to IEC 61508 | None |
| Performance level acc. EN ISO 13849-1 | None |
| Appendant operation agent (Ex ia) | No |
| Appendant operation agent (Ex ib) | No |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Width | 71.5 мм |
| Height | 90 мм |
| Depth | 58 мм |
| Degree of Protection | IEC: IP20, UL/CSA Type: - |
На этой странице вы можете приобрести Eaton Стартовый набор, состоит из арт. 197211 (24V DC), кабеля и лицензии для EASYSOFT v7 арт. 197225 (артикул: 0000197228). Мы рекомендуем внимательно изучить представленные технические характеристики и ознакомиться с официальными брошюрами от Eaton, чтобы выбрать товар в нужной конфигурации.
Для покупки модели EASY-BOX-E4-DC1 просто нажмите кнопку «В корзину» и перейдите в корзину для оформления заказа. Большинство наших товаров имеются в наличии на складе; в случае отсутствия необходимой позиции мы обеспечим её поставку под заказ.
После оформления заказа наши менеджеры оперативно свяжутся с вами для уточнения деталей оплаты и наиболее удобных вариантов доставки.
Точки самовывоза в Москве, курьерская доставка, отправка транспортными компаниями.
Мы являемся официальными дистрибьюторами и дилерами ведущих мировых брендов.
Мы работаем с 1998 года и поставляем только качественное оборудование.
Склад 1: 2528 штСклад 1: 193 шт